There are many rules associated with soapmaking, but there are good reasons for most of them. At the same time, it sometimes happens that a unique recipe makes us rethink the fundamental principles of soapmaking. For example, the 100% coconut oil soap demonstrates such a case. Traditional recipes refer to a combination of oils in soapmaking, while this unique soap contains only coconut oil as the base oil and includes a superfat of 20%.
In general terms, it is expected that this soap will result in solid bars with huge amounts of rich and creamy bubbles. It would be noteworthy that other ingredients, such as aloe juice, coconut flour, as well as fragrances, have also been used in the recipe. The final outcome is characterized by two colours creating swirls in the bar.
Why Is This Coconut Oil Soap Unique?

Coconut oil is widely used by soapmakers to achieve hard soap with a lot of bubbles. However, a high content of coconut oil in the soap can cause dryness for some customers. Thus, this particular formula uses more superfat to leave more unreacted oils in the soap produced.
The recipe also uses aloe vera juice instead of water. Coconut flour and mica are included for texture and appearance, although both are optional. Keep in mind that the final qualities depend on accurate measurements, processing conditions, and proper curing.
Ingredients and Formula
- 36 oz coconut oil (76-degree type)
- 5.18 oz sodium hydroxide (lye)
- 10.53 oz chilled aloe vera juice
- 1.5 oz fragrance oil (optional and suitable for cold-process soap)
- 2 teaspoons coconut flour (optional)
- 2 teaspoons mica (optional)
- Small soap balls for decorative embeds (optional)
Important: This is an experienced-soapmaker recipe, not a beginner project. Before making it, independently verify the lye calculation using a reliable soap calculator, including the oil’s SAP value and intended superfat. Use a fragrance within its recommended usage rate. Always wear suitable gloves, eye protection, and protective clothing, and work with good ventilation. Never use aluminium equipment with sodium hydroxide.
Step-by-Step Preparation

1. Prepare the mould: Line your soap mould if needed. Cut a piece of sturdy cardboard to fit its length and height, then position it down the centre to create two separate sections.
2. Make the lye solution: Slowly add sodium hydroxide to the chilled aloe vera juice while stirring carefully. Never pour liquid onto dry lye. The mixture may change to a yellowish shade. Allow it to cool in a safe, ventilated area.
3. Melt the coconut oil: Warm the coconut oil to approximately 120–130°F until completely melted. Keeping the oil sufficiently warm helps reduce the risk of false trace, which can occur when coconut oil begins solidifying during mixing.
4. Prepare the colours: Divide the mica and coconut flour between two small containers. Mix each portion with a little melted base oil until smooth and free of dry clumps.
5. Combine the ingredients: Carefully incorporate the cooled lye solution into the melted oil using a stick blender. Blend until the mixture reaches a stable emulsion. Avoid unnecessary blending, as a thick trace can make decorative pouring difficult.
6. Divide and colour: Separate the soap batter equally into two containers. Add the prepared colour mixtures and stir thoroughly. Aim for a medium trace so the batter has enough body to hold its shape.
7. Create the swirl: Pour both coloured portions into opposite sides of the mould at a similar pace. Slowly lift out the cardboard divider. Use a bamboo skewer or chopstick to create gentle swirling patterns. Add soap-ball embeds if desired.
8. Unmould and cut: Allow the soap to harden sufficiently before removing it from the mould. The original method suggests cutting within 6–12 hours, but timing varies with temperature and formulation. Check that the loaf is firm enough to handle without damaging it.
Equipment You Will Need

Keep a soap mould, heat-resistant containers, a suitable mixing bucket, measuring jugs, a silicone spatula, a stick blender, a cardboard divider and bamboo skewer ready before starting. Use dedicated soapmaking equipment rather than utensils that will later be used for food.
Final Thoughts
This coconut oil soap is an interesting project for experienced makers who want to experiment with high-superfat formulations and decorative designs. Its contrasting colours and creamy-looking lather make it visually appealing, too. Allow the finished bars to cure fully, and check their safety and quality before use. With careful preparation and accurate measurements, soapmaking can be both a creative hobby and a rewarding learning experience.